SCSI-1,SCSI-2,SCSI-3

SCSI (Pronounced as Skuzzy) is an Acronym for Small Computer System Interface. It is a set of standards for connecting and transferring data between Computer and Peripheral devices. It was developed by Shugart Associates Company in 1981 as a universal and intelligent disk drive interface.

This Interface is generally used for connecting Hard Disk Drives and Tape Drives but can also be used to connect wide range of other devices. This Interface is derived from Shugart Associates System Interface (SASI pronounced as sassy). SASI Controller works as bridge between Disk Drive’s Low level interface and Host Computer. Larry Boucher is considered to be the father of SASI and SCSI. Up to February 1982, ANSI developed this specification as SASI and “Shugart Associates System Interface”. Committee documenting this Standard did not allow it to be named after a company name and after a full day discussion named as SCSI (Small Computer System Interface).

How to Test SMPS Power Supply: Testing Pins, Voltage Checks and Troubleshooting

```html

Power Supply is one of the most important parts of your computer system because a computer cannot operate properly without a reliable power supply. Here I am describing the functions of an SMPS (Switch Mode Power Supply), the voltage levels of its ATX connector pins, and some common techniques used to troubleshoot power supply problems.

Functions Performed

The following functions are provided by an SMPS (Switch Mode Power Supply):

1. Its main function is to convert AC input power into the DC voltages required to operate computer components.
2. Different voltage levels are supplied to the motherboard, processor, storage devices and other components.
3. The output voltage is regulated within the power supply's specified operating range when input voltage and load conditions are within its limits.
4. Depending on the model, it provides protection against overvoltage, overcurrent, overload and short-circuit conditions.
5. Its cooling system helps control the heat generated during operation.

Safety note: Never open the SMPS casing or touch its internal components. Internal parts can retain dangerous electrical energy even when the unit is unplugged. Do not use an improvised metal pin to bridge connector terminals. Use a compatible commercial PSU tester or ask a qualified technician to perform electrical testing.

8 Bit Industry Standard Architecture(ISA) or PC Bus

ISA (Industry Standard Architecture) was first used with the IBM PC in 1981. It was the first open system for PC architecture. No restriction was put on the use of this interconnection method by the IBM. IBM offered free licensing of this PC architecture technique which resulted in more popularity of this. Some main features of 8 bit ISA are:

1) It was introduced by IBM and was the first open system for PC architecture.
2) It provides data transfer rate up to 4.77 Mbps.
3) ISA interface contains 62 pins to interface add on cards. These 62 pins are arranged in two rows, each containing 31 pins.
4) Distance between each pin is 0.1 Inches.
5) 8 Bit ISA make use of Following signals:
    3 Ground Signals
    2 +5V DC Supply
   +12,12,-5V DC supply
    Bidirectional 8 bit data Bus.
   20 Address line, hence memory address space of 1MB (2<sup>20</sup>=1MB)
   3 DMA request lines
   3 DMA acknowledge lines.
   Six Interrupt Support

Table given below illustrates all signals used by this connector along with their functions:

Functions of North Bridge

After CPU North Bridge is the core chipset on the computer motherboard that controls data communication between CPU and Motherboard. It runs at full processor speed. It mainly works as Memory controller and System Controller. It incorporates interface between Processor and rest of motherboard components.

Chipset is actually numbered according to the number of North Bridge. Nvidia GeForce 320M is a Northbridge /Southbridge fabrication in a single chip. Following are some major functions that are performed by the North Bridge:

Processor Support: Chipset is the major decider on the motherboard that decides which processor is supported, of what speed and how many processors are supported? Following areas are covered by North Bridge under this:

CPU Interface Socket Type: North Bridge is interfaced with the processor through host processor bus and CPU socket. No. of processor sockets are available in the market for this purpose such as Socket 7,Socket -1, Socket A etc. This socket number is decider that which particular Processor class is supported on that motherboard.

Functions of South Bridge

South Bridge is a chipset that is used for controlling I/O Functions such as USB, disk interfaces, PCI Bus, Super I/O Chip support etc. In other words it works as peripheral controller. The main feature of Southbridge is that same South Bridge can be used with different types of North bridges. It is generally located at the lower edge of the motherboard.

Following are some Major Functions Performed by South Bridge:

I/O Control: South Bridge is the key point that decides which kinds of buses, at what speed, and which features will be supported by the system. South bridge controls PCI and ISA buses and transfers information to them or from them.

USB Ports Control: USB Support on the motherboard is provided by the south bridge and which is the main interface for mostly peripheral devices.

Bus Bridge Support: Two main type of buses ISA and PCI are used in most of the modern computers. Since, there is a great speed mismatch between them. South Bridge provides the feature of connecting these two dissimilar buses. This is achieved by PCI-to-ISA bridge chip.

SPX (Sequential Packet Exchange) Protocols

It is the version of Novels’ Sequenced Packet Protocol (SPP). It is a transport layer protocol and is used by client server applications. This protocol provides a packet delivery system for third party applications.

Figure given below illustrate the structure of SPX packet.

Connection Control Flag	DataStream Type
Source Connection ID
Destination Connection ID
Sequence Number
Acknowledge Number
Allocation Number
0-534 bytes of data

Connection Control Flag: Four flags are used to control bidirectional data flow of SPX connection. If its value is 1 flag is said to be set and if its value is 0 it is said to not set. Following are four flags:

How to Download YouTube Videos?

Hello friend today I am going to tell you very special software with the help of which you can download videos from any site like YouTube. Actually this is a plugin that comes with our beloved Mozilla Firefox web browser. So the primary platform to install this plugin is Mozilla Firefox. Here are some important points about this plugin:

Plugin Name is Video Download Helper. It is a tool for web content extraction and can download videos and pictures from other sites.

It’s absolutely free and can be downloaded from official website of Mozilla (Click Here to Download)

No need to install any video downloader.

No Download Limit.

Fast Download Speed.

And one more exciting thing about this plugin is that it can also convert videos into your desired formats during download. Hence we get double benefit Download + Video Conversion.

To perform video conversion another plugin Convert Helper is also installed and can be downloaded from official site at no cost means its also absolutely free. (Click Here to Download)

Another advantage is that you can download videos as per your size means high quality or low quality.

How to Install Download helper?

Here are Some Simple steps that you can use to install and use Video Download Helper.